18, 36 and 58 W fluorescent luminaires

• Single and twin luminaires for 26 mm dia. bi-pin fluorescent tubes
  standard G13 lampholders
• Anti-vibration lampholder with spring system
• Electronic ballast and DC 220/240 V ~ (± 10%) 198 TO 250 V... -
• Frequency: 50/60 Hz
• Tubes operate separately: if one tube fails, the other tube remains lit
• Instant start. Power factor > 0.95
• Pre-impregnated fibre glass reinforced polyester body
• Polycarbonate diffuser hinged to body
• Open and close by hexagonal spanner (M10 Allen key) or flat screw-driver
• Positive safety switch operates when diffuser is opened, allowing lamp replacement when live
• Ballast fixed by screw, fitted with a grich connector
• Elastomer gasket
• High temperature internal wiring.

Standard version

Three M25 tapped cable entries including 2 tapped cable entries on one end and one on the apposite end
Supplied with:

• One M25 polymide cable gland (sealing dia. 8 to 18.5 mm)
• Two M25 blanking plugs
• One 5 x 4 mm² max. flexible or 5 x 6 mm² max. rigid connection terminal block

Through - wiring version

Three M25 tapped cable entries including 2 tapped cable entries on one end and the one on the apposite end.
Supplied with:

• Two M25 polymide cable glands (sealed dia. 8 to 18.5 mm)
• One M25 blanking plug
• Tow 5 x 4 mm² max. flexible or 5 x 6 mm². rigid connection terminal blocks
   (2.5 mm² internal wiring)

Pole mounting version

1 cable entry via M25 cable (sealing dia.8 to 18.5mm)
Supplied with one 3 x 4 mm² connection terminal block and internal flange for anchoring cable.

Fixing accessories

		Cat. No.	Pack.
Set of 2 half-clamps for amounting on 49 mm (1 - 1/2 ") dia. tube or 42 mm (1 - 1/4") dia. tube For mounting on 60 mm (2") dia. tube Please Consult us		965 93	1
Set of zinc-plated steel M8 ring bolts for suspending unit Internal dia. 20 mm		965 94	1
42 mm dia. galvanized steel wall-mouting pole (for cat. Nos 965 14/20) Fastener c/c distance: Vertical 140 mm horizontal 128 mm centres (Four 10.5 mm dia. holes)		965 95	1
Set of aluminium brackets for fixing unit to flat surface Fixing position: 200 mm (Two 9 x 14 mm dia. holes)		965 97	1
Set of 2 aluminium hinged brackets fpr adjustable installation of the luminaire Fixing position: 100 mm Centres (Two 9 x 14 mm dia. holes)		965 98	1
Triangular headed key for opening old generation fluorescent luminaries (cat. No 965 08)		965 99	1

Spare parts

• Elastomer gasket.
• Diffuser with gasket.
• Lampholders with lampholder supports. (complete assembly)
• Electronic replica rolex ballast.
• Switch.
• Opening/closing kit.
• Reflector.

Options on request (please consult us)

• Electronic ballast 110/127 V ~ 50/60 Hz + 10 %
• Electronic ballast 245 V ~ 50/60 Hz + 10 %
• Level lighting.

                                                    965 55